Differences between revisions 57 and 65 (spanning 8 versions)
⇤ ← Revision 57 as of 2017-08-06 00:15:18 →
Size: 5409
Editor: TunayDurmaz
Comment: recover broken cmake and ccmake
← Revision 65 as of 2018-01-31 18:26:44 → ⇥
Size: 6416
Editor: TunayDurmaz
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= NOTE =
Due to recent version upgrades of some packages, build instructions may be broken. Assessing the situation and applying fixes if necessary...
Line 2: Line 5:
Line 5: Line 7:
== GPU Support ==
For features which support the GPU, please complete the source install instructions below, then follow the GPU instructions from the binary installation page.
Line 6: Line 11:
Line 9: Line 13:
=== Linux Clusters ===
The approaches below will install EMAN2 with a precompiled version of OpenMPI, which may or may not work with the batch queuing system on your cluster. If it does not work, the symptom will be that MPI parallel jobs will use only a single node, no matter how many you have allocated in your job. If this happens please see the linux cluster installations on the [[EMAN2/Install/BinaryInstallAnaconda|binary install page]]. Those instructions should also work with either of the source-based installations below.
https://github.com/cryoem/eman2/pull/167
Line 10: Line 17:
 1. Download and install [[https://conda.io/miniconda.html | Miniconda2]] - make sure you don't get the Python3 version  1. Download and install [[https://conda.io/miniconda.html|Miniconda2]] - make sure you get the '''Python2''' version, not --(Python3)-- version.
  a. '''Linux''': Latest version known to work with Linux is [[https://repo.continuum.io/miniconda/Miniconda2-4.3.21-Linux-x86_64.sh|here]].
Line 12: Line 20:
 1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2 | GitHub:cryoem/eman2]].   1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2|GitHub:cryoem/eman2]].
Line 16: Line 24:
 }}} }}}
Line 21: Line 29:
conda install eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge # Linux
 }}}
  a. If you have a broken cmake or ccmake, try the following sequence of commands. {{{		 conda install eman-deps="*"="np19*" -c cryoem -c defaults -c conda-forge # Linux
}}}
  a. If you have a broken cmake or ccmake, try the following sequence of commands.
  {{{
Line 27: Line 36:
conda install eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge # Linux
 }}}
 1. Create a build directory (out-of-source builds are recommended). 		 conda install eman-deps="*"="np19*" -c cryoem -c defaults -c conda-forge # Linux
}}}
 1. Create a build directory (out-of-source builds are recommended).
Line 32: Line 41:
cmake -DENABLE_CONDA=ON <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON 
 }}}
  * If conda is not found in PATH, set CONDA_ROOT to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_ROOT to an environment, make sure to delete any cmake variables that cmake already found, variables like EMAN_INSTALL_PREFIX, EMAN_PREFIX, *_LIBRARY or similar, *_INCLUDE_PATH or similar.		 cmake <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
}}}
  * If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
Line 38: Line 47:
 1. Build EMAN2 {{{  1. Build EMAN2
 {{{
Line 41: Line 51:
 }}}
 1. You may also wish to run 		 }}}
 1. You may also wish to run
Line 49: Line 59:
 1. Download and install [[https://www.continuum.io/downloads | Anaconda2]] - make sure you don't get the Python3 version  1. Download and install [[https://www.continuum.io/downloads|Anaconda2]] - make sure you get the '''Python2''' version, not --(Python3)-- version.
Line 51: Line 61:
 1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2 | GitHub:cryoem/eman2]].   1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2|GitHub:cryoem/eman2]].
Line 55: Line 65:
 }}} }}}
Line 58: Line 68:
conda install cmake=3.8 -c conda-forge
conda create -n eman-env eman-deps -c cryoem -c defaults -c conda-forge # Mac
conda create -n eman-env eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge # Linux		 conda create -n eman-env cmake=3.8 -c conda-forge
conda install -n eman-env eman-deps -c cryoem -c defaults -c conda-forge # Mac
conda install -n eman-env eman-deps="*"="np19*" -c cryoem -c defaults -c conda-forge # Linux
Line 62: Line 72:
 }}}
  a. If you have a broken cmake or ccmake, try the following sequence of commands. {{{		 }}}
  a. If you have a broken cmake or ccmake, try the following sequence of commands.
  {{{
Line 67: Line 78:
conda install eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge # Linux
 }}}		 conda install eman-deps="*"="np19*" -c cryoem -c defaults -c conda-forge # Linux
}}}
Line 70: Line 81:
 1. Create a build directory (out-of-source builds are recommended).   1. Create a build directory (out-of-source builds are recommended).
Line 73: Line 84:
cmake -DENABLE_CONDA=ON <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON 
 }}}
  * If conda is not found in PATH, set CONDA_ROOT to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_ROOT to an environment, make sure to delete any cmake variables that cmake already found, variables like EMAN_INSTALL_PREFIX, EMAN_PREFIX, *_LIBRARY or similar, *_INCLUDE_PATH or similar.		 cmake <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
}}}
  * If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
Line 79: Line 90:
 1. Build EMAN2 {{{  1. Build EMAN2
 {{{
Line 82: Line 94:
 }}}
 1. You may also wish to run 		 }}}
 1. You may also wish to run
Line 87: Line 99:
 }}} }}}

NOTE

Due to recent version upgrades of some packages, build instructions may be broken. Assessing the situation and applying fixes if necessary...

Anaconda based Build, All Platforms

Note that even with a source build it may be difficult to get this working on systems with very old operating system installs. We normally try to support OS versions 6-7 years old. Please report any problems.

GPU Support

For features which support the GPU, please complete the source install instructions below, then follow the GPU instructions from the binary installation page.

Mac OS X, Linux

There are two approaches you can use for the installation. One uses 'Miniconda' and the other uses full 'Anaconda'. Miniconda is a much smaller (~30 MB) install, provides everything EMAN2 needs, and can be expanded with more packages as you like. Anaconda is a much more complete environment (~300 MB), including useful tools such as the Jupyter notebook, but will require the use of a conda environment to make EMAN2 work properly at present.

Linux Clusters

The approaches below will install EMAN2 with a precompiled version of OpenMPI, which may or may not work with the batch queuing system on your cluster. If it does not work, the symptom will be that MPI parallel jobs will use only a single node, no matter how many you have allocated in your job. If this happens please see the linux cluster installations on the binary install page. Those instructions should also work with either of the source-based installations below. https://github.com/cryoem/eman2/pull/167

Miniconda2

  1. Download and install Miniconda2 - make sure you get the Python2 version, not Python3 version.

    1. Linux: Latest version known to work with Linux is here.

  2. Make sure that you have added miniconda2/bin as the first element in your PATH, and that you do not have LD_LIBRARY_PATH or PYTHONPATH set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Miniconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/miniconda.

  3. Checkout EMAN2 code from GitHub:cryoem/eman2. 

    cd <path-to-eman2-source>
git clone https://github.com/cryoem/eman2.git
  4. Install dependencies 
    conda install cmake=3.8 -c conda-forge
conda install eman-deps -c cryoem -c defaults -c conda-forge              # Mac OSX
conda install eman-deps="*"="np19*" -c cryoem -c defaults -c conda-forge  # Linux
    1. If you have a broken cmake or ccmake, try the following sequence of commands. 
      conda remove cmake bzip2 expat jsoncpp ncurses
conda install cmake=3.8 -c conda-forge
conda install eman-deps -c cryoem -c defaults -c conda-forge              # Mac OSX
conda install eman-deps="*"="np19*" -c cryoem -c defaults -c conda-forge  # Linux
  5. Create a build directory (out-of-source builds are recommended). 
    cd <build-directory>
cmake <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON

    • If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use cmake-gui.

      • If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
      • Rerun cmake.
  6. Build EMAN2 
    make -j
make install
  7. You may also wish to run 
    make test          # if everything passes you are fine, if there are failures, you are welcome to ask
make test-verbose  # verbose test output to help to identify specific failures

Anaconda2

  1. Download and install Anaconda2 - make sure you get the Python2 version, not Python3 version.

  2. Make sure that you have added anaconda2/bin as the first element in your PATH, and that you do not have LD_LIBRARY_PATH or PYTHONPATH set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Miniconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/miniconda.

  3. Checkout EMAN2 code from GitHub:cryoem/eman2. 

    cd <path-to-eman2-source>
git clone https://github.com/cryoem/eman2.git
  4. Install dependencies 
    conda create -n eman-env cmake=3.8 -c conda-forge
conda install -n eman-env eman-deps -c cryoem -c defaults -c conda-forge              # Mac
conda install -n eman-env eman-deps="*"="np19*" -c cryoem -c defaults -c conda-forge  # Linux
source activate eman-env
    1. If you have a broken cmake or ccmake, try the following sequence of commands. 
      conda remove cmake bzip2 expat jsoncpp ncurses
conda install cmake=3.8 -c conda-forge
conda install eman-deps -c cryoem -c defaults -c conda-forge              # Mac OSX
conda install eman-deps="*"="np19*" -c cryoem -c defaults -c conda-forge  # Linux

  5. Note that you will need to run  source activate eman-env  once in each shell before being able to run EMAN2 commands.

  6. Create a build directory (out-of-source builds are recommended). 
    cd <build-directory>
cmake <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON

    • If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use cmake-gui.

      • If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
      • Rerun cmake.
  7. Build EMAN2 
    make -j
make install
  8. You may also wish to run 
    make test          # if everything passes you are fine, if there are failures, you are welcome to ask
make test-verbose  # verbose test output to help to identify specific failures

EMAN2/COMPILE_EMAN2_ANACONDA-PRE-CONDA-ENVIRONMENTS (last edited 2019-11-01 14:27:54 by TunayDurmaz)