Differences between revisions 57 and 64 (spanning 7 versions)
Revision 57 as of 2017-08-06 00:15:18
Size: 5409
Editor: TunayDurmaz
Comment: recover broken cmake and ccmake
Revision 64 as of 2017-11-01 21:23:45
Size: 6221
Editor: SteveLudtke
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
Line 5: Line 4:
== GPU Support ==
For features which support the GPU, please complete the source install instructions below, then follow the GPU instructions from the binary installation page.
Line 6: Line 8:
Line 9: Line 10:
=== Linux Clusters ===
The approaches below will install EMAN2 with a precompiled version of OpenMPI, which may or may not work with the batch queuing system on your cluster. If it does not work, the symptom will be that MPI parallel jobs will use only a single node, no matter how many you have allocated in your job. If this happens please see the linux cluster installations on the [[EMAN2/Install/BinaryInstallAnaconda|binary install page]]. Those instructions should also work with either of the source-based installations below.
Line 10: Line 14:
 1. Download and install [[https://conda.io/miniconda.html | Miniconda2]] - make sure you don't get the Python3 version  1. Download and install [[https://conda.io/miniconda.html|Miniconda2]] - make sure you get the '''Python2''' version, not --(Python3)-- version.
  a. '''Linux''': Latest version known to work with Linux is [[https://repo.continuum.io/miniconda/Miniconda2-4.3.21-Linux-x86_64.sh|here]].
Line 12: Line 17:
 1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2 | GitHub:cryoem/eman2]].   1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2|GitHub:cryoem/eman2]].
Line 16: Line 21:
 }}} }}}
Line 22: Line 27:
 }}}
  a. If you have a broken cmake or ccmake, try the following sequence of commands. {{{
}}}
  a. If you have a broken cmake or ccmake, try the following sequence of commands.
 
{{{
Line 28: Line 34:
 }}}
 1. Create a build directory (out-of-source builds are recommended). 
}}}
 1. Create a build directory (out-of-source builds are recommended).
Line 32: Line 38:
cmake -DENABLE_CONDA=ON <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON 
 }}}
  * If conda is not found in PATH, set CONDA_ROOT to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_ROOT to an environment, make sure to delete any cmake variables that cmake already found, variables like EMAN_INSTALL_PREFIX, EMAN_PREFIX, *_LIBRARY or similar, *_INCLUDE_PATH or similar.
cmake <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
}}}
  * If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
Line 38: Line 44:
 1. Build EMAN2 {{{  1. Build EMAN2
{{{
Line 41: Line 48:
 }}}
 1. You may also wish to run 
}}}
 1. You may also wish to run
Line 49: Line 56:
 1. Download and install [[https://www.continuum.io/downloads | Anaconda2]] - make sure you don't get the Python3 version  1. Download and install [[https://www.continuum.io/downloads|Anaconda2]] - make sure you get the '''Python2''' version, not --(Python3)-- version.
Line 51: Line 58:
 1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2 | GitHub:cryoem/eman2]].   1. Checkout EMAN2 code from [[https://github.com/cryoem/eman2|GitHub:cryoem/eman2]].
Line 55: Line 62:
 }}} }}}
Line 58: Line 65:
conda install cmake=3.8 -c conda-forge
conda create -n eman-env eman-deps -c cryoem -c defaults -c conda-forge # Mac
conda create -n eman-env eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge # Linux
conda create -n eman-env cmake=3.8 -c conda-forge
conda install -n eman-env eman-deps -c cryoem -c defaults -c conda-forge # Mac
conda install -n eman-env eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge # Linux
Line 62: Line 69:
 }}}
  a. If you have a broken cmake or ccmake, try the following sequence of commands. {{{
}}}
  a. If you have a broken cmake or ccmake, try the following sequence of commands.
 
{{{
Line 68: Line 76:
 }}} }}}
Line 70: Line 78:
 1. Create a build directory (out-of-source builds are recommended).   1. Create a build directory (out-of-source builds are recommended).
Line 73: Line 81:
cmake -DENABLE_CONDA=ON <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON 
 }}}
  * If conda is not found in PATH, set CONDA_ROOT to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_ROOT to an environment, make sure to delete any cmake variables that cmake already found, variables like EMAN_INSTALL_PREFIX, EMAN_PREFIX, *_LIBRARY or similar, *_INCLUDE_PATH or similar.
cmake <path-to-eman2-source>
# on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
}}}
  * If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use '''cmake-gui'''.
   * If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
Line 79: Line 87:
 1. Build EMAN2 {{{  1. Build EMAN2
{{{
Line 82: Line 91:
 }}}
 1. You may also wish to run 
}}}
 1. You may also wish to run
Line 87: Line 96:
 }}} }}}

Anaconda based Build, All Platforms

Note that even with a source build it may be difficult to get this working on systems with very old operating system installs. We normally try to support OS versions 6-7 years old. Please report any problems.

GPU Support

For features which support the GPU, please complete the source install instructions below, then follow the GPU instructions from the binary installation page.

Mac OS X, Linux

There are two approaches you can use for the installation. One uses 'Miniconda' and the other uses full 'Anaconda'. Miniconda is a much smaller (~30 MB) install, provides everything EMAN2 needs, and can be expanded with more packages as you like. Anaconda is a much more complete environment (~300 MB), including useful tools such as the Jupyter notebook, but will require the use of a conda environment to make EMAN2 work properly at present.

Linux Clusters

The approaches below will install EMAN2 with a precompiled version of OpenMPI, which may or may not work with the batch queuing system on your cluster. If it does not work, the symptom will be that MPI parallel jobs will use only a single node, no matter how many you have allocated in your job. If this happens please see the linux cluster installations on the binary install page. Those instructions should also work with either of the source-based installations below.

Miniconda2

  1. Download and install Miniconda2 - make sure you get the Python2 version, not Python3 version.

    1. Linux: Latest version known to work with Linux is here.

  2. Make sure that you have added miniconda2/bin as the first element in your PATH, and that you do not have LD_LIBRARY_PATH or PYTHONPATH set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Miniconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/miniconda.
  3. Checkout EMAN2 code from GitHub:cryoem/eman2.

    cd <path-to-eman2-source>
    git clone https://github.com/cryoem/eman2.git
  4. Install dependencies
    conda install cmake=3.8 -c conda-forge
    conda install eman-deps -c cryoem -c defaults -c conda-forge              # Mac OSX
    conda install eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge  # Linux
    1. If you have a broken cmake or ccmake, try the following sequence of commands.
      conda remove cmake bzip2 expat jsoncpp ncurses
      conda install cmake=3.8 -c conda-forge
      conda install eman-deps -c cryoem -c defaults -c conda-forge              # Mac OSX
      conda install eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge  # Linux
  5. Create a build directory (out-of-source builds are recommended).
    cd <build-directory>
    cmake <path-to-eman2-source>
    # on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
    • If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use cmake-gui.

      • If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
      • Rerun cmake.
  6. Build EMAN2
    make -j
    make install
  7. You may also wish to run
    make test          # if everything passes you are fine, if there are failures, you are welcome to ask
    make test-verbose  # verbose test output to help to identify specific failures

Anaconda2

  1. Download and install Anaconda2 - make sure you get the Python2 version, not Python3 version.

  2. Make sure that you have added anaconda2/bin as the first element in your PATH, and that you do not have LD_LIBRARY_PATH or PYTHONPATH set in your shell. If you need these settings for other software, you can still try to proceed, and hope they do not conflict with Miniconda. Alternatively, you may set up a shell script or alias to make these environment changes on demand when you want to use EMAN2/miniconda.
  3. Checkout EMAN2 code from GitHub:cryoem/eman2.

    cd <path-to-eman2-source>
    git clone https://github.com/cryoem/eman2.git
  4. Install dependencies
    conda create -n eman-env cmake=3.8 -c conda-forge
    conda install -n eman-env eman-deps -c cryoem -c defaults -c conda-forge              # Mac
    conda install -n eman-env eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge  # Linux
    source activate eman-env
    1. If you have a broken cmake or ccmake, try the following sequence of commands.
      conda remove cmake bzip2 expat jsoncpp ncurses
      conda install cmake=3.8 -c conda-forge
      conda install eman-deps -c cryoem -c defaults -c conda-forge              # Mac OSX
      conda install eman-deps="*"="np18*" -c cryoem -c defaults -c conda-forge  # Linux
  5. Note that you will need to run  source activate eman-env  once in each shell before being able to run EMAN2 commands.

  6. Create a build directory (out-of-source builds are recommended).
    cd <build-directory>
    cmake <path-to-eman2-source>
    # on linux, also add -DENABLE_OPTIMIZE_MACHINE=ON
    • If conda is not found in PATH, set CONDA_PREFIX to your conda environment directory. It could be the main installation or an environment. This step most likely will be needed only if you use cmake-gui.

      • If you set CONDA_PREFIX to an environment, make sure to delete any cmake variables that cmake already found, variables like *_LIBRARY or similar, *_INCLUDE_PATH or similar.
      • Rerun cmake.
  7. Build EMAN2
    make -j
    make install
  8. You may also wish to run
    make test          # if everything passes you are fine, if there are failures, you are welcome to ask
    make test-verbose  # verbose test output to help to identify specific failures

EMAN2/COMPILE_EMAN2_ANACONDA-PRE-CONDA-ENVIRONMENTS (last edited 2019-11-01 14:27:54 by TunayDurmaz)